Separate names with a comma.
Hello! Open RPTE.ini and add GRS2 to the "Override" key.
Who knows. I have no desire to deal with this. JWEI is dead for us.
AFAIK, is not firmware upgradable.
It's hybrid. Graphics engine from RedPanda, ArcticFox configuration with Foxy skin. Only color customizable. [IMG]
I don't know, if it better, but UI will look the same as for other 80x160 displays :) [IMG]
I'm from Ukraine. It's not a secret, just was never told before. I'll get started, and when I need to check or test something on your device...
Everything about pinout can be found in OEM firmware, so this is not a problem at all. Ideally, I would have one of these three box mods, but due...
https://nfeteam.org/forum/threads/lost-vape-quest-chip-grus-ursa-cyborg-btb-thelema-centaurus.4905/page-9#post-13124
Hello! Yep, Tinker is equipped with early "Avatar" using Nuvoton M452 MCU. In theory, it can be supported. In practice, this will require...
A hack for Grus 2.0 boxes with old Grus bootloader and problems with overheating :) Flash attached build, then set Hardware Version to: 1.00 or...
Hello! Sorry, the "Force PID" option is not implemented for STM32 devices, so you have to re-flash the bootloader. P. S. If you will wait for a...
Colleagues, I want to draw your attention to one detail. 072 and 103 in LQFP48 packaging have similar pinout, but with one nuance. [IMG] To make...
Nope. Different bootloaders are intended for hardware identification in ArcticFox since it is unified. As Grus 2.0 have the same hardware as Ursa,...
You're absolutely right, it is software issue. Thank you! Here is the difference between early and newer PCBs: [IMG] Indeed, Grus 2.0 should be...
Thank you! Is your Grus 2.0 working correctly with Ursa boot? Early Grus and Ursa have different pinouts. I'll take a look for the OEM 2.0...
Go to "Main Menu" -> "Settings" -> "Advanced" -> "Temp": short Fire button click - switch between Int and Ext, as earlier; long press Fire...
Probably, it is PCB design issue. Anyway, tonight I'll upload here modified build.
Ext channel is for thermistor placed on the PCB, Int is internal MCU temperature sensor. In your case Int is also getting hot. There should be no...
Overheating of the MCU really bothers me. Int 170F is really too much. I can add option to switch off this protection at all. But... under your...
Hmm, it is absolutely normal. But while using the temperature raises smoothly, or there is some random peaks? It seems that is 2.0 issue:...
