ArcticFox 170624

Discussion in 'Archive' started by maelstrom2001, Jun 24, 2017.

Thread Status:
Not open for further replies.
  1. maelstrom2001

    maelstrom2001 Developer
    NFE Team

    Joined:
    May 4, 2017
    Messages:
    1,729
    Likes Received:
    1,590
    Minimum required NFE Tools version: 170624

    English:

    support for Eleaf Pico 25;
    changed Deep Sleep / Saver timeout logic;
    reduced wake-up delay on display initialization, increased bus speed for 96x16 displays;
    changed filtering of multi clicks to prevent incorrect counts on screens changes;
    fixed atomizer reading while displaying splash screen.
    Russian:

    поддержка Eleaf Pico 25;
    изменена логика таймаутов Deep Sleep / Saver;
    уменьшена задержка при выходе из глубокого сна на инициализации дисплея, увеличена скорость шины дисплеев 96x16;
    изменена фильтрация мультикликов для предотвращения неправильных подсчетов при смене экранов;
    исправлено чтение атомайзера в момент показа заставки.
     
    ilyxa, MeekLogic, Vaper and 1 other person like this.
  2. Паввел

    Паввел New Member

    Joined:
    Jun 24, 2017
    Messages:
    3
    Likes Received:
    1
  3. joeblowma

    joeblowma Active Member

    Joined:
    May 17, 2017
    Messages:
    101
    Likes Received:
    80
    Thanks for the new build! Button multi-clicks have improved for me (from screen asleep I was getting 2 click option instead of 3, fixed!)

    Not sure you want to hear it again, but... maybe a clue in this behaviour change with this build.
    Every time I see something like this, I try smart: lazy on the predator again... I currently have 3 clicks set to on/off, if I do 3 clicks to turn it off, then right away do 3 clicks to turn it on, and wait for the splash to finish it reverts to the first ato in the list that matches the resistance. If I fire before the splash is over it stays on the one I had before I shut it off. I no longer get 0Ω live resistance or 'no atomizer' messages right after turning it on.

    edit:/ if I leave the mod off for a few minutes, it switches profiles regardless of whether I fire it during splash. Still no 0Ω/'no atomizer' message but it takes a little longer holding fire down to exit splash and start firing, so I assume that could be occurring during splash.
    <turns smart off again again>
     
    #3 joeblowma, Jun 25, 2017
    Last edited: Jun 25, 2017
  4. Alexander Vogt

    Alexander Vogt New Member

    Joined:
    May 30, 2017
    Messages:
    11
    Likes Received:
    2
    Thx for your work

    For beer or coffee

    Donate 6FG69163FX836621W
     
  5. MoDuL

    MoDuL New Member

    Joined:
    May 21, 2017
    Messages:
    11
    Likes Received:
    4
    Απαιτούμενη έκδοση NFE Tools: 170624

    Ελληνικά:
    Υποστήριξη για το Eleaf Pico 25.
    αλλαγή στη λογική των Βαθύ ύπνου / Προφύλαξη οθόνης.
    μείωση στη καθυστέρηση αφύπνησης κατα την οθόνη εκκίνησης, αυξηση ταχύτητας στις οθόνες 96x16.
    αλλαγή φιλτραρίσματος των πολλαπλών κλικ για να αποτραπούν λανθασμένες μετρήσεις στις αλλαγές οθόνης.
    διόρθωση ανάγνωσης ατμοποιητή κατα την εμφάνιση της οθόνης εκκίνησης.​
     
    #5 MoDuL, Jun 26, 2017
    Last edited: Jun 26, 2017
    ilyxa and Oykawa like this.
  6. Janishewskiy

    Janishewskiy Active Member

    Joined:
    May 17, 2017
    Messages:
    142
    Likes Received:
    27
    What's new in 170627?
     
  7. ReikoKitsune

    ReikoKitsune Developer
    NFE Team

    Joined:
    May 4, 2017
    Messages:
    674
    Likes Received:
    589
    Nothing for you.
     
Thread Status:
Not open for further replies.