eLeaf iStick Power 80 - battery issue

Discussion in 'Issues' started by IcyFridge, Jun 22, 2020.

  1. IcyFridge

    IcyFridge New Member

    Joined:
    Sep 4, 2017
    Messages:
    5
    Likes Received:
    0
    When running the latest Arctic Fox on my iPower, the battery will only charge up to 95% (4.08V). It's a new device, so the battery should be going up to 100% (4.15V).

    Thoughts?
     
  2. maelstrom2001

    maelstrom2001 Developer
    NFE Team

    Joined:
    May 4, 2017
    Messages:
    1,339
    Likes Received:
    1,193
    Hello!
    iPower have dedicated uncontrolled charger IC, so the firmware can not interrupt charging or go to sleep while charging is in the progress.
    It might be odd battery voltage reading, faulty charger etc. Check battery voltage after full chrage on OEM firmware and compare with AF measurements, then use BVO to fix battery voltage reading. As to charging itself, again, it could not be fixed due to uncontrolled IC.