Ikuu i80

Discussion in 'Suggestions' started by zalaros, Nov 20, 2017.

Tags:
  1. zalaros

    zalaros New Member

    Joined:
    Nov 20, 2017
    Messages:
    5
    Likes Received:
    0
    Hi there. Is this device going to be supported? Is there any test build that I could try? Thank you.
     
  2. maelstrom2001

    maelstrom2001 Developer
    NFE Team

    Joined:
    May 4, 2017
    Messages:
    1,024
    Likes Received:
    940
    Hello!
    If you have this box and can flash and test, I'll post the build tonight here.
     
  3. zalaros

    zalaros New Member

    Joined:
    Nov 20, 2017
    Messages:
    5
    Likes Received:
    0
    I just received it but unfortunately it is dead... So I will send it back for replacement. When I have it in my hands again I will let you know. Thank you.
     
  4. maelstrom2001

    maelstrom2001 Developer
    NFE Team

    Joined:
    May 4, 2017
    Messages:
    1,024
    Likes Received:
    940
    Before sending it back try to connect it to PC. If it will be detected by any firmware updater (NToolbox Updater will show "[M074] Unknown device" in recovery mode, for example), leave it charging for about 1..1,5 hour. Our russian colleague had such a "half-dead" box, it turned out that the battery was simply exhausted.
     
    Viennaboy likes this.
  5. zalaros

    zalaros New Member

    Joined:
    Nov 20, 2017
    Messages:
    5
    Likes Received:
    0
    Thank you for your help. Unfortunately it is dead dead. No software update app can detect it. I will wait for the replacement.
     
  6. zalaros

    zalaros New Member

    Joined:
    Nov 20, 2017
    Messages:
    5
    Likes Received:
    0
    So today the store has received the ikuun 80 and they confirmed that it is indeed dead. They don't have another one in stock so they proposed to me to send me the ikuun 200. Will this device be supported by nfe team or should I choose another device?

    Sent from my Redmi Note 4 using Tapatalk
     
  7. maelstrom2001

    maelstrom2001 Developer
    NFE Team

    Joined:
    May 4, 2017
    Messages:
    1,024
    Likes Received:
    940
  8. zalaros

    zalaros New Member

    Joined:
    Nov 20, 2017
    Messages:
    5
    Likes Received:
    0
    I suppose I'm lucky that I asked first... Thank you very much :-D

    Sent from my Redmi Note 4 using Tapatalk
     
  9. Grayfull

    Grayfull New Member

    Joined:
    Nov 22, 2018
    Messages:
    4
    Likes Received:
    0
    Hi team
    Can i use my ikuu i80 with arcticfox ?
     
  10. maelstrom2001

    maelstrom2001 Developer
    NFE Team

    Joined:
    May 4, 2017
    Messages:
    1,024
    Likes Received:
    940
    Hello!
    At this moment support is not implemented, but it can be added, if you help us test it :)
     
  11. Grayfull

    Grayfull New Member

    Joined:
    Nov 22, 2018
    Messages:
    4
    Likes Received:
    0
    Okay when i add the bin with on nfe tools an error lessage appear


    Envoyé de mon MIX en utilisant Tapatalk
     
  12. maelstrom2001

    maelstrom2001 Developer
    NFE Team

    Joined:
    May 4, 2017
    Messages:
    1,024
    Likes Received:
    940
    because
    Just wait a day or two and I'll post here build which you can flash.
     
  13. Grayfull

    Grayfull New Member

    Joined:
    Nov 22, 2018
    Messages:
    4
    Likes Received:
    0
    Okay i wait

    Envoyé de mon MIX en utilisant Tapatalk
     
  14. maelstrom2001

    maelstrom2001 Developer
    NFE Team

    Joined:
    May 4, 2017
    Messages:
    1,024
    Likes Received:
    940
    Nightly build: 181123
    Currently the battery temperature protection system (ENU) is disabled, charging is always enabled.
    Please check charging, it should not only be displayed, but actually should take the current from USB, and battery voltage should increase while connected to USB.
     
  15. Migpei

    Migpei New Member

    Joined:
    Dec 6, 2018
    Messages:
    3
    Likes Received:
    0
    Hello Maelstrom2001, I have the IKUU I80 and I could try if I get the the file.
     
  16. maelstrom2001

    maelstrom2001 Developer
    NFE Team

    Joined:
    May 4, 2017
    Messages:
    1,024
    Likes Received:
    940
  17. Menelas

    Menelas New Member

    Joined:
    Jun 6, 2018
    Messages:
    19
    Likes Received:
    2
  18. maelstrom2001

    maelstrom2001 Developer
    NFE Team

    Joined:
    May 4, 2017
    Messages:
    1,024
    Likes Received:
    940
    This box is cursed. Two owners have asked test build then gone offline without a word. I'm worried.
     
  19. Fabio785

    Fabio785 New Member

    Joined:
    Oct 2, 2018
    Messages:
    17
    Likes Received:
    14
    Hi , Maelstrom i tried the Nightly the box just doesn't display anything at all when updated to ArcticF
    reupdated it with stock form eleaf site an goes back to normal ;)
    if you need testing i've saved one from trash by swapping the internal battery with an 18650 vtc6 instead of the Lipo for the moment ;)
     
  20. maelstrom2001

    maelstrom2001 Developer
    NFE Team

    Joined:
    May 4, 2017
    Messages:
    1,024
    Likes Received:
    940
    Hello!
    It's been too long from November, so let's debug recent nightly: 190221
    Unfortunately, the black display after firmware update mean nothing, so I ask you for more info, if you have some spare time and want to help:
    • will box start after update from Safe Mode?
    • does box detected by PC after flash? If yes, please provide screenshot of Firmware Updater;
    • does box works normaly but display nothing? Start Screenshoter and try take screenshot;
    • if the box after update is permanently off (boot mode = APROM but does not switched on via 5 clicks), does it display something on press and hold Fire + Up and Fire + Down?
    • try to reflash it with Force PID in iStick Pico 25 mode and tell what happens.