looking for best settings for Sai Top Airflow Atomizer and Pico COMBO - 3 coils

Discussion in 'Discussions' started by tony852, Dec 30, 2018.

  1. tony852

    tony852 New Member

    Joined:
    Dec 30, 2018
    Messages:
    1
    Likes Received:
    0
    hello,

    i have arctic fox installed on the pico.

    here is the link i purchased the kit from - https://humboldtvapetech.com/produc...mbo-w-choice-eleaf-pico25-85w-eleaf-pico-75w/

    i have the Titanium Bucket pre-installed still remaining. then i have 2 more coils that are different and unused. i want to create profiles for each coil .

    here is what i have just in case if you need to know.
    [​IMG]

    this is the only setting i have for the default coil. tell me where i can change?
    [​IMG]

    any other software suggestions would be great.
     
  2. dampfan

    dampfan Member

    Joined:
    May 18, 2017
    Messages:
    31
    Likes Received:
    12
    Why use Mode: Power instead of temperature mode for titanium wire?
     
  3. lounik

    lounik New Member

    Joined:
    Nov 5, 2017
    Messages:
    3
    Likes Received:
    0
    As I can read from the web site the material of bucket is ss or titanium (not the coil)

    Recommended Settings:
    Titanium Bucket Coil: 24-28W; TC-Ni, 400-450F
     
  4. The Vapor Ninja

    The Vapor Ninja New Member

    Joined:
    Jan 18, 2019
    Messages:
    9
    Likes Received:
    0
    Recommended setting for the Ti bucket coil on the Sai TAF is:

    TCR #315 - 38watts - 380 F - 0.68-.072 resistance, locked.