Good afternoon. I recently purchased a wismec rx300 and almost immediately installed a fox on it, used it literally for a day and started catching the no ato,izer found error, at first rarely and then constantly, for a while it helps to press down or twist the tank. I thought that the problem was in the sagging connectors, but the device is new and when returning to the standard wismec firmware, the problem completely goes away. I tested several versions of the fox firmware, namely: P12] ArcticFox 190624 and [P12] ArcticFox 190602, but the problem persists. What should I do? Device: WISMEC RX300 Tank: Zeus X
Hello! Yep, OEM firmware hides a 510 connector issue common to Wismec boxes. If you plan to continue with ArcticFox, unfortunately, you have to fix it. Please watch the video, the second part of it is dedicated to this.
https://translated.turbopages.org/p...https/www.ecigtalk.org/forum/f16/t159040.html What do you say about this method? Is it more reliable?
Yes, common grounding with this method is very solid. In any case, it will also be useful to re-press the connector with foil, as Милен recommends in his video, this will also increase the mechanical reliability.
