Stainless Steel malfunction.

Discussion in 'Issues' started by The Vapor Ninja, Jan 18, 2019.

  1. The Vapor Ninja

    The Vapor Ninja New Member

    Joined:
    Jan 18, 2019
    Messages:
    9
    Likes Received:
    0
    Hello !
    I've got an Espion 200w mod, using crown III atomizer, at 0.50 resistance, stainless steel coil. Got it set on 45 watts, 390 F, on SS TC.
    Running Red Panda version # 180905.
    Normally, it works perfect, but, occasionally, when I fire it, the wattage readout quickly sinks to about 9 watts, and it won't fire.
    I play around with it, removing the atomizer, rebooting it, changing modes.....
    Not sure what in all the chaos I do to fix it, or if it just gets over its 'mood'.

    Anyone else have this issue ?
    It's really frustrating when it happens, it seems no combo of choices solves it. it just clears up eventually.

    Would love to hear more input on this.

    All the best !
    -tvn

    PS, edit - this usually happens when i attach the tank from using another on a diff mode. Thanks in advance for any input.
     
    #1 The Vapor Ninja, Jan 18, 2019
    Last edited: Jan 18, 2019
  2. The Vapor Ninja

    The Vapor Ninja New Member

    Joined:
    Jan 18, 2019
    Messages:
    9
    Likes Received:
    0
    I seem to have fixed the problem.
    Apparently my resistance was set too low.
    Also, turned off Smart Mode, and turned on PI-REG.
    Working like a charm now, at .57 ohms.